The Heatstar HSU250NGPSS Big Boxx is a 250,000 BTU separated combustion natural gas unit heater with a stainless steel heat exchanger, for factories and farm buildings up to 8,400 sq. ft. It draws combustion air from outside the building, so it can be used in humid or corrosive areas such as greenhouses, and it can also be installed in a standard combustion configuration.
Features
- Separated combustion: draws combustion air from outside the building
- Suited to humid or corrosive areas; can also be installed as standard combustion
- Stainless Steel heat exchanger
- Air louvers with three locking positions direct the heat
- Ships for natural gas; propane conversion kit sold separately
- Install by a licensed gas technician to local code
Specifications
- Model: HSU250NGPSS
- Stock number: F163034
- Output: 250,000 BTU
- Heating area: up to 8,400 sq. ft.
- Fuel: natural gas
- Gas inlet connection: 1/2in
- Minimum inlet pressure: 3.5in WC
- Maximum inlet pressure: 14in WC
- Electrical: 110 vac
- Ignition: Electronic
- Clearance to combustibles: Above 6in; Behind 18in; Sides 6in
- Weight: 244 lb
- Dimensions: 35 x 40.5 x 29 in. (L x W x H)
Can this heater be used indoors?
It depends on the model. Indirect fired heaters vent their exhaust separately, so only clean, heated air goes into the space. That makes them suited to enclosed job sites and tents. Direct fired, forced air and radiant portable heaters release combustion products into the space and need proper ventilation. Unit heaters are permanently installed and vented to the outdoors. Check the Specifications section of the listing and the owner’s manual before use.
What is the difference between indirect fired and direct fired?
An indirect fired heater burns fuel inside a heat exchanger and sends the exhaust out through a separate vent, so the heated air stays clean and dry. A direct fired heater puts all of its heat, and its combustion products, straight into the space. Direct fired units are more fuel efficient but need good ventilation.
How do I choose the right size heater?
Each listing shows the maximum heating area in square feet. Match that figure to the space you need to heat. Uninsulated buildings, high ceilings and very cold conditions may call for a larger unit.
Does the heater need electricity?
Some models do and some don’t. Forced air, indirect fired, direct fired, NOMAD box heaters and unit heaters need power to run their fans and controls. Portable radiant propane heaters, the cabinet heater and the HS25 radiant garage heater run without electricity. The Specifications section of each listing confirms the requirement.
Is a hose and regulator included?
Portable forced air propane heaters, the HS35LP and HS125LP radiant heaters and the HS200CVX convection heater include a 20 ft. hose and regulator. Check the Features section of the listing for the specific model.
Can I convert a natural gas heater to propane?
It depends on the model:
- HSU utility unit heaters include a propane conversion kit.
- Big Boxx unit heaters need a conversion kit, sold separately.
- The HS4000NG/LP and the NOMAD TC models are dual fuel and run on either natural gas or propane.
Do unit heaters need professional installation?
Yes. Big Boxx and HSU unit heaters are permanently installed gas appliances. They must be installed by a licensed gas technician in line with local codes.
Do you sell ducts, thermostats and accessories?
Yes. Ducts, duct adapters, thermostats, vent kits and conversion kits are available for most models. Contact us with your heater model and we’ll confirm what fits.
Do you offer pricing for multiple units?
Yes. Contact us with the models and quantities you need and we’ll send a quote.