1-877-804-9940
1-877-804-9940
Replacement tooling, diamond blades and parts for EDCO concrete surface preparation equipment. This collection covers Magna-Trap grinding tooling and polishing pads, Crete-Planer drums, cutters and start-up packs, Crete-Crusher bits, diamond saw blades for walk-behind, self-propelled, masonry and tile saws, chisel scaler blades and chisels, Tile Shark blades, and HEPA vacuum accessories.
Each listing shows the EDCO stock number and the machines it is made for, so crews and rental fleets can reorder the right part. Most tooling is sold in the pack sizes EDCO supplies.
EDCO 7" Resin 100-Grit Polishing Pad, Wet/Dry for Handheld Grinder, or TMC-7 Turbo Edge Grinder with adapter. It is a polishing pad for 7" hand hel...
View full detailsEDCO 7" Resin 50-Grit Polishing Pad, Wet/Dry for Handheld Grinder, or TMC-7 Turbo Edge Grinder with adapter. It is a polishing pad for 7" hand held...
View full detailsEDCO 7" Aluminum Backing Pad for Handheld Grinder only. It is an accessory for 7" hand held grinders.SpecificationsStock number: ALUM178-ED
EDCO 7" Flexible Backing Pad for Handheld Grinder only. It is an accessory for 7" hand held grinders.SpecificationsStock number: SC9P0007-ED
EDCO Cupwheel Adapter Nut Set (Needed For 7" Arrow Cupwheel). It is an accessory for 7" hand held grinders.SpecificationsStock number: CFL034-ED
EDCO 7" Premium Arrow Cupwheel, 10seg Non-Threaded 5/8 & 7/8 Arbor for Turbo Grinder. It is a cupwheel for 7" hand held grinders.Specifications...
View full detailsEDCO Metabo 7" 6600 RPM 15amp Angle Grinder with 7" Premium Convertible Dust Shroud & Loop Handle. It is a 7" angle grinder kit for concrete gr...
View full detailsEDCO Conversion Plate for Diamatic/Sase 780 with 3 Large Bush Hammers. It is a heavy duty bush hammer accessory for concrete grinders.Specification...
View full detailsEDCO Convert Husqvarna PG690 & PG820 with 3 Large Bush Hammers Included. It is a heavy duty bush hammer accessory for concrete grinders.Specifi...
View full detailsEDCO Large Bush Hammer (Magna-Trap Style). It is a heavy duty bush hammer accessory for concrete grinders.SpecificationsStock number: BHLG45-SF-ED
EDCO Large Bush Hammer with Grease Fitting (Bolt-On Style). It is a heavy duty bush hammer accessory for concrete grinders.SpecificationsStock numb...
View full detailsEDCO Fully Machined Magna-Trap Holder with Magnet. It is a plate or adapter that lets planetary grinders run EDCO Magna-Trap tooling.Specifications...
View full detailsEDCO 10" Blastrac BG250 to Magna-Trap Conversion Plate. It is a plate or adapter that lets planetary grinders run EDCO Magna-Trap tooling.Specifica...
View full detailsEDCO 9.5" Sase/Diamatic 780 To Magna-Trap Conversion Plate. It is a plate or adapter that lets planetary grinders run EDCO Magna-Trap tooling.Speci...
View full detailsEDCO Sase/Diamatic 555/580 To Magna-Trap Conversion Plate. It is a plate or adapter that lets planetary grinders run EDCO Magna-Trap tooling.Specif...
View full detailsEDCO 10.5" Husqvarna PG690 & PG820 to Magna-Trap Conversion Plate. It is a plate or adapter that lets planetary grinders run EDCO Magna-Trap to...
View full detailsEDCO 9" Husqvarna PG680 to Magna-Trap Conversion Plate. It is a plate or adapter that lets planetary grinders run EDCO Magna-Trap tooling.Specifica...
View full detailsEDCO 7" Husqvarna PG450 to Magna-Trap Conversion Plate. It is a plate or adapter that lets planetary grinders run EDCO Magna-Trap tooling.Specifica...
View full detailsEDCO 11" Husqvarna PG280 V2 to Magna-Trap Conversion Plate. It is a plate or adapter that lets planetary grinders run EDCO Magna-Trap tooling.Speci...
View full detailsEDCO 11" Husqvarna PG280 to Magna-Trap Conversion Plate. It is a plate or adapter that lets planetary grinders run EDCO Magna-Trap tooling.Specific...
View full detailsEDCO Adapter for Husqvarna Redilock to use Magna-Trap Tooling, sold individually (3 Needed Per Plate). It is a plate or adapter that lets planetary...
View full detailsEDCO Pro-Polishing 3" 3000-Grit Premium Resin Puck with Velcro Back for use with Magna-Trap Floor Grinders. It is a resin polishing puck for EDCO M...
View full detailsEDCO Pro-Polishing 3" 1500-Grit Premium Resin Puck with Velcro Back for use with Magna-Trap Floor Grinders. It is a resin polishing puck for EDCO M...
View full detailsEDCO Pro-Polishing 3" 800-Grit Premium Resin Puck with Velcro Back for use with Magna-Trap Floor Grinders. It is a resin polishing puck for EDCO Ma...
View full details{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}