1-877-804-9940
1-877-804-9940
Equipment for grinding, scarifying, cutting and stripping concrete and floor surfaces, for contractors, facility maintenance teams and rental fleets across Canada. Prepare slabs for new coatings, remove epoxy, mastic, tile and vinyl, cut joints and openings, and control silica dust at the tool.
Why Shop With FacilitySupplyPro?
Shop by Job
Choosing by depth of removal. Floor grinders work at around 1/32" for thin coatings and floor preparation. Crete-Planer scarifiers remove at 1/8" per pass and deeper. The Crete-Crusher scabbler removes at 1/4" per pass for deep repair work.
Power options. Many machines come in gas, propane and electric versions, which you choose on the product page. Several electric models run on 230V or 460V three phase power, so check the supply on site before you order.
Tell us the surface, the coating or material you are removing and the size of the area, and we will help you pick the right machine. Email sales@facilitysupplypro.com or call 1-877-804-9940.
Replacement wheeled carrier cart for the EDCO EH1500KIT engine hoist. The engine hoist is not included.SpecificationsStock number: 99501-ED
The EDCO engine hoist breaks down and reassembles in minutes and travels in its wheeled carrier cart, which one person can handle and which fits th...
View full detailsThe EDCO TR-18 is a compact walk-behind chain trencher that digs trenches up to 18" deep. It fits in a standard work truck or van and is narrow eno...
View full detailsThe EDCO TMS-10 is a 10" electric tile saw that cuts up to 12" tile diagonally or 20" tile lengthwise. A 10" continuous rim blade, water pump and a...
View full detailsThe EDCO 20" masonry saw is a freestanding saw with a 14" to 20" blade capacity for patios, landscaping and commercial masonry work. A hands-free f...
View full detailsThe EDCO BB-14 is a portable 14" masonry saw for block, brick and paver cutting, with a rolling table that accommodates 16" blocks. It comes in ele...
View full detailsThe EDCO SS-30 is a 30" self-propelled concrete saw for deep cutting, with a Kohler gas engine or a 15 HP three phase electric motor. The blade is ...
View full detailsThe EDCO SS-24 is a 24" self-propelled saw for concrete and asphalt with a 9.5" maximum cut depth, in gas or propane.Features 24" blade capacity, 9...
View full detailsThe EDCO SS-20 is a 20" self-propelled concrete saw with a 7.75" maximum cut depth, available with Honda gas, Kohler propane or three phase electri...
View full detailsThe EDCO DS-20 is a 20" downcut walk-behind saw with a 7.75" maximum cut depth, for slab cutting, contraction joints, asphalt patch repairs, traffi...
View full detailsThe EDCO DS-18E is an 18" electric downcut walk-behind saw for concrete cutting where a gas engine is not wanted, with a 6.75" maximum cut depth.Fe...
View full detailsThe EDCO KL-18 is an 18" downcut walk-behind saw with a 13 HP Honda gas engine and a 6.75" maximum cut depth. It is suited to short-run slab cuttin...
View full detailsThe EDCO KL-14 is a compact 14" downcut walk-behind saw with a 4.75" maximum cut depth, built into a 3 ft. by 1.5 ft. footprint. Its collapsible ha...
View full detailsThe EDCO ALR-5A is a 5 ft. lightweight aluminum air chisel scaler for removing floor tile and other hard and soft coverings from a standing positio...
View full detailsThe EDCO ALR-5 is a 5 ft. steel air chisel scaler for removing floor tile and other hard and soft coverings from a standing position.Features Remov...
View full detailsThe EDCO ALR-4A is a 4 ft. lightweight aluminum air chisel scaler for removing floor tile and other hard and soft coverings.Features Removes up to ...
View full detailsThe EDCO ALR-4 is a 4 ft. steel air chisel scaler for removing floor tile and other hard and soft coverings, replacing hammer and chisel work.Featu...
View full detailsThe EDCO ALR-E is an ergonomic steel air chisel scaler that lets the operator remove floor tile and coverings while standing upright.Features Remov...
View full detailsThe EDCO ALR-2A is a 2 ft. lightweight aluminum air chisel scaler for removing tile and other hard and soft coverings from floors, walls and fixed ...
View full detailsThe EDCO ALR-2 is a 2 ft. steel air chisel scaler for removing tile and other hard and soft coverings from floors, walls and fixed objects, replaci...
View full detailsThe EDCO Big Stick straight is a heavy-duty 5 ft. air chisel scaler for industrial removal work, including chipping concrete, thick coatings and ce...
View full detailsThe EDCO Big Stick ergonomic is a heavy-duty 5 ft. air chisel scaler for industrial removal work, including chipping concrete, thick coatings and c...
View full detailsThe EDCO TS-8 Tile Shark is an 8" walk-behind floor stripper that removes vinyl, linoleum, carpet, rubber and other soft coverings from concrete. I...
View full detailsThe EDCO 36" epoxy screed box for spreading epoxy floor material.SpecificationsStock number: C90400-ED
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}