Application Lead
The XPOWER XD-130Li is a commercial LGR dehumidifier rated at 125 pints per day at AHAM and 220 pints per day at saturation, moving 420 CFM. Bluetooth connectivity and a colour display board let crews check status without opening a containment. Automatic speed control adjusts to ambient conditions through the dry.

Features

• Rated airflow of 420 CFM
• Water removal of 125 Pints per day @ AHAM (80°F, 60% RH)
• Draws 8.2 A
• Speed control: Automatic Speed Control
• Automatic purge pump with 40 ft drainage hose
• Roto Molded Polyethylene housing
• 25 ft power cord
• ETL / CETL safety certified

Technical Specifications

Water Removal Performance

• Rated capacity: 125 Pints per day @ AHAM (80°F, 60% RH)
• Process airflow: 420 CFM
• Fan control: Automatic Speed Control
• Continuous drainage via automatic purge pump and 40 ft hose, no tank monitoring required

Recommended Applications

• Structural drying after water loss
• Flood and burst pipe response
• Crawl spaces, basements, and mechanical rooms
• Construction and concrete curing
• Warehouse and storage humidity control
• Property management and facility maintenance

Is this item in stock?

Stock moves quickly on restoration equipment, particularly during storm and flood season. We confirm availability on every order before release. If you need confirmed availability before ordering, send us the model number and we will check.

Is this genuine XPOWER equipment?

Yes. We are an authorized dealer supplied through XPOWER's Canadian distributor. Every unit is factory new in original packaging with full manufacturer warranty. This is not grey market or parallel import stock.

What does a True HEPA filter actually capture?

True HEPA is rated at 99.97 percent efficiency against particles down to 0.3 microns, covering dust, pollen, construction debris, mould spores, and bacteria carried on particulate. Models with an activated carbon stage also capture odours and volatile organic compounds, which particulate filtration alone does not address. Filter configuration is listed on each product page.

How do I know which replacement filter fits my unit?

Filters are dimensionally specific to the housing and are not interchangeable across models. Every filter listing states the models it fits, and every unit listing shows its filter configuration by stage and part number. Match on the model number printed on your unit, not on appearance. If unsure, send us the model number and we will confirm the correct part.

How often should filters be replaced?

Interval depends on environment and runtime, so there is no fixed schedule. A unit in an active demolition containment loads filters far faster than one in an occupied office. Washable nylon mesh and pre-filter stages are cleaned and reused. Pleated media, carbon, and HEPA stages are replaced when loaded. Inspect pre-filters regularly, as a loaded pre-filter is what shortens HEPA life.

Can I run several units on one circuit?

Several models include a daisy chain outlet, in some cases GFCI protected, allowing units to be linked from a single supply. Total draw across the chain must stay within the circuit rating. Amp draw for each model is listed in its specifications.

Can this be ducted for negative air?

Several models include a ductable exhaust port for negative air containment. Duct size is listed in the specifications where supported. Models without a listed duct size are intended for open air scrubbing rather than ducted containment.

Do you offer volume or contract pricing?

Yes. We supply property management groups, restoration contractors, and facility teams across Canada. We issue formal quotes for procurement and tender processes and accept purchase orders from established accounts. We can also set up recurring filter orders so consumables arrive before they are needed. Contact us at info@facilitysupplypro.com or 1-877-804-9940.

Shipping

• Ships from our distributor's warehouse in Oakville, Ontario. Sold and shipped within Canada only.
• In stock orders are typically released within 1 to 3 business days.
• Yukon, Northwest Territories, Nunavut, and other remote destinations may require special arrangements and an additional carrier charge. Contact us before ordering so we can confirm.
• Availability is confirmed on every order before release. Items not held in Canada are brought in from the manufacturer, which can add 2 to 4 weeks. We advise the expected date before charging you, and you may cancel for a full refund.

Warranty

• XPOWER units carry a one year limited manufacturer warranty from date of original purchase, covering defects in materials and workmanship under normal use.
• Warranty covers parts and labour, plus one way shipping within Canada on approved claims.
• Filters, media, and wear items such as power cords and fuses are consumables and are not covered.
• To open a claim, contact us with your order number plus the model and serial number. We coordinate the repair or replacement on your behalf.

Returns

• 30 days from delivery. Contact us for a return authorization before shipping anything back. Returns without authorization are not accepted.
• Items must be unused, in original packaging, and in resalable condition with all original parts and materials.
• Restocking fee of 20 percent on units and 30 percent on parts and filters.
• Return freight is the responsibility of the buyer. Original shipping costs are not refunded.

Questions on any of the above: info@facilitysupplypro.com or 1-877-804-9940.