{"title":"Concrete Scarifiers and Surface Planers","description":"\u003cp\u003eEDCO Crete-Planer scarifiers level, remove, texture and groove concrete and asphalt, and handle heavier removal than a floor grinder. This collection also includes the EDCO Crete-Crusher scabbler for deep concrete removal and the EDCO traffic line remover for painted lines on asphalt. Walk-behind and self-propelled models are available in gas, propane and electric.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy Shop With FacilitySupplyPro?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eShipping across Canada, with freight calculated at checkout\u003c\/li\u003e\n\u003cli\u003e1-year limited warranty on EDCO equipment\u003c\/li\u003e\n\u003cli\u003eHelp matching a machine, tooling and dust control to your job, email sales@facilitysupplypro.com\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhich Machine Is Right for You?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCPL-8 Scari-Lite:\u003c\/strong\u003e 8\" working width, approximately 175 to 250 sq. ft. per hour at 1\/32\" per pass. Light etching ahead of new coatings. 1.5 HP electric or 5.5 HP gas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCPM-8 Crete-Planer:\u003c\/strong\u003e 8\" working width, approximately 350 to 500 sq. ft. per hour at 1\/8\" per pass, and removes traffic lines at 800 to 1,000 lineal ft. per hour. Honda gas, 230V electric or propane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCPM-10 Crete-Planer:\u003c\/strong\u003e 10\" working width, approximately 500 to 700 sq. ft. per hour at 1\/8\" per pass. Surface leveling and heavy coating removal. Honda gas or 230V or 460V three phase electric.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCPU-10FC self-propelled:\u003c\/strong\u003e 10\" working width, approximately 500 to 750 sq. ft. per hour at 1\/8\" per pass, with depth control up to 3\/16\" per pass. Upcut drum and hydrostatic drive for large coating removal jobs. Honda gas or three phase electric.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCPM-8 and CPM-10 with PCDiamond drum:\u003c\/strong\u003e the same planers supplied with a PCDiamond flat tooth drum installed and feather control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCD-5 Crete-Crusher:\u003c\/strong\u003e air-powered 5-head scabbler that removes up to 250 sq. ft. per hour at 1\/4\" per pass, for recapping floors and removing spalled or laitance concrete. Requires 160 CFM at 100 PSI.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTLR-7 traffic line remover:\u003c\/strong\u003e 7\" working width, approximately 700 to 1,000 lineal ft. per hour with EDCO TLR carbide cutters. One operator pushes or pulls it through streets, crosswalks and parking lots.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHow deep do you need to go?\u003c\/strong\u003e A floor grinder handles thin coatings at around 1\/32\". The Scari-Lite etches at 1\/32\" per pass. The CPM and CPU Crete-Planers remove at 1\/8\" per pass and deeper. The Crete-Crusher works at 1\/4\" per pass for deep removal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck your power supply.\u003c\/strong\u003e The 10\" electric Crete-Planers run on three phase power, so confirm 230V or 460V three phase is available on site, or choose a gas or propane model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/facilitysupplypro.com\/collections\/concrete-floor-grinders-in-canada\"\u003eConcrete floor grinders\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/facilitysupplypro.com\/collections\/hepa-dust-extraction-vacuums-for-concrete\"\u003eHEPA dust extraction vacuums\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/facilitysupplypro.com\/collections\/edco-concrete-and-floor-prep-equipment\"\u003eAll EDCO equipment\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTell us the surface, the coating or material you are removing and the size of the area, and we will help you pick the right machine. Email sales@facilitysupplypro.com or call 1-877-804-9940.\u003c\/p\u003e","products":[{"product_id":"edco-cpm-8-8-in-walk-behind-crete-planer-concrete-scarifier","title":"EDCO CPM-8 8\" Walk-Behind Crete-Planer Concrete Scarifier","description":"\u003cp\u003eThe EDCO CPM-8 Crete-Planer is an 8\" walk-behind scarifier that levels, removes, textures and grooves concrete and asphalt. It scarifies approximately 350 to 500 sq. ft. per hour at a 1\/8\" depth per pass and removes traffic lines at 800 to 1,000 lineal ft. per hour.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower source mounted over the drum to reduce vibration and maximize surface contact\u003c\/li\u003e\n\u003cli\u003eCompact design with front-mounted lifting handle for loading and unloading\u003c\/li\u003e\n\u003cli\u003eVacuum port equipped\u003c\/li\u003e\n\u003cli\u003eVibration isolation components reduce hand-arm vibration\u003c\/li\u003e\n\u003cli\u003eAdjustable feather control for precise cutting\u003c\/li\u003e\n\u003cli\u003eExtension cord for the electric model available separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e9 HP Honda Gas\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock number: 79300-ED\u003c\/li\u003e\n\u003cli\u003ePower Source: Gasoline\u003c\/li\u003e\n\u003cli\u003eEngine: Honda GX270\u003c\/li\u003e\n\u003cli\u003eHorsepower: 9 HP\u003c\/li\u003e\n\u003cli\u003eRPM: 2,150\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 35 x 20 x 39 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 206 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e5 HP 230V Electric\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock number: 79500-ED\u003c\/li\u003e\n\u003cli\u003ePower Source: Electric\u003c\/li\u003e\n\u003cli\u003eHorsepower: 5 HP\u003c\/li\u003e\n\u003cli\u003eVoltage: 230 V\u003c\/li\u003e\n\u003cli\u003ePhase: Single Phase\u003c\/li\u003e\n\u003cli\u003eAmps: 19.5 A\u003c\/li\u003e\n\u003cli\u003eRPM: 2,160\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 35 x 20 x 39 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 235 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e10 HP Propane\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eStock number: 72600-ED\u003c\/li\u003e\u003c\/ul\u003e","brand":"EDCO","offers":[{"title":"9 HP Honda Gas","offer_id":68106853417112,"sku":"79300-ED","price":12389.99,"currency_code":"CAD","in_stock":true},{"title":"5 HP 230V Electric","offer_id":68106853449880,"sku":"79500-ED","price":12389.99,"currency_code":"CAD","in_stock":true},{"title":"10 HP Propane","offer_id":68106853482648,"sku":"72600-ED","price":17690.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0648\/5891\/4968\/files\/CPM-8E_79500-scaled-3-2048x2048.jpg?v=1795328863"},{"product_id":"edco-cpm-8-8-in-walk-behind-crete-planer-with-pcdiamond-drum-and-feather-control","title":"EDCO CPM-8 8\" Walk-Behind Crete-Planer with PCDiamond Drum and Feather Control","description":"\u003cp\u003eThis EDCO CPM-8 8\" walk-behind Crete-Planer ships with the 8\" PCDiamond flat tooth drum installed, for scarifying and coating removal on concrete. It shares the CPM-8 frame, with the power source over the drum and an adjustable feather control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8\" PCDiamond flat tooth drum installed as standard\u003c\/li\u003e\n\u003cli\u003eAdjustable feather control for precise cutting\u003c\/li\u003e\n\u003cli\u003ePower source mounted over the drum to reduce vibration and maximize surface contact\u003c\/li\u003e\n\u003cli\u003eCompact design with front-mounted lifting handle\u003c\/li\u003e\n\u003cli\u003eVacuum port equipped\u003c\/li\u003e\n\u003cli\u003eVibration isolation components reduce hand-arm vibration\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e9 HP Honda Gas\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock number: 79300PCD-ED\u003c\/li\u003e\n\u003cli\u003eEngine: Honda GX270\u003c\/li\u003e\n\u003cli\u003eRPM: 2150\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 37.5 x 20 x 38 in.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e5 HP 230V Electric\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock number: 79500PCD-ED\u003c\/li\u003e\n\u003cli\u003ePhase: Single Phase\u003c\/li\u003e\n\u003cli\u003eAmps: 20 A\u003c\/li\u003e\n\u003cli\u003eRPM: 2160\u003c\/li\u003e\n\u003cli\u003eMax Cord Length: 100 ft 10 Gauge\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 37.5 x 20 x 38 in.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e10 HP Propane\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eStock number: 72600PCD-ED\u003c\/li\u003e\u003c\/ul\u003e","brand":"EDCO","offers":[{"title":"9 HP Honda Gas","offer_id":68106853515416,"sku":"79300PCD-ED","price":25081.99,"currency_code":"CAD","in_stock":true},{"title":"5 HP 230V Electric","offer_id":68106853548184,"sku":"79500PCD-ED","price":25081.99,"currency_code":"CAD","in_stock":true},{"title":"10 HP Propane","offer_id":68106853580952,"sku":"72600PCD-ED","price":30562.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0648\/5891\/4968\/files\/CPM-8-Updated-scaled-1-2048x2048_dad3cfab-0ea6-460d-8d0b-3a45aacd74d2.jpg?v=1795328870"},{"product_id":"edco-cpl-8-scari-lite-8-in-walk-behind-crete-planer-concrete-scarifier","title":"EDCO CPL-8 Scari-Lite 8\" Walk-Behind Crete-Planer Concrete Scarifier","description":"\u003cp\u003eThe EDCO CPL-8 Scari-Lite is a lighter 8\" walk-behind Crete-Planer for etching concrete ahead of new coatings. It scarifies approximately 175 to 250 sq. ft. per hour at a 1\/32\" depth per pass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8\", 6-shaft drum accepts carbide and steel cutters\u003c\/li\u003e\n\u003cli\u003eUses the same carbide and steel cutters as the CPM-8\u003c\/li\u003e\n\u003cli\u003eUniversal vacuum port hookup standard\u003c\/li\u003e\n\u003cli\u003eAvailable in 1.5 HP electric or 5.5 HP gas\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1.5 HP 115V Electric\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock number: 69300-ED\u003c\/li\u003e\n\u003cli\u003ePower Source: Electric\u003c\/li\u003e\n\u003cli\u003ePhase: Single Phase\u003c\/li\u003e\n\u003cli\u003eAmps: 17.2 A\u003c\/li\u003e\n\u003cli\u003eRPM: 1065\u003c\/li\u003e\n\u003cli\u003eMax Cord Length: 20ft, 10 Gauge\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 31 x 19 x 42.5 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 145 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e5.5 HP Gas\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock number: 69500-ED\u003c\/li\u003e\n\u003cli\u003ePower Source: Gasoline\u003c\/li\u003e\n\u003cli\u003eRPM: 2222\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 31 x 19 x 42.5 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 150 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EDCO","offers":[{"title":"1.5 HP 115V Electric","offer_id":68106853613720,"sku":"69300-ED","price":8114.99,"currency_code":"CAD","in_stock":true},{"title":"5.5 HP Gas","offer_id":68106853646488,"sku":"69500-ED","price":8114.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0648\/5891\/4968\/files\/69500_CPL-8.jpg?v=1795328875"},{"product_id":"edco-cpm-10-10-in-walk-behind-crete-planer-concrete-scarifier","title":"EDCO CPM-10 10\" Walk-Behind Crete-Planer Concrete Scarifier","description":"\u003cp\u003eThe EDCO CPM-10 Crete-Planer is a 10\" walk-behind scarifier for aggressive removal work such as surface leveling and heavy coating removal on concrete and asphalt. It scarifies approximately 500 to 700 sq. ft. per hour at a 1\/8\" depth per pass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/4\" steel frame with heavy-duty, oversized bearings\u003c\/li\u003e\n\u003cli\u003eTethered emergency stop switch\u003c\/li\u003e\n\u003cli\u003e6\" rear wheels for easier handling\u003c\/li\u003e\n\u003cli\u003eVacuum port standard for dust control\u003c\/li\u003e\n\u003cli\u003eSide-loading 6-shaft and 8-shaft drums available\u003c\/li\u003e\n\u003cli\u003eTungsten carbide or steel cutters available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e13 HP Honda Gas\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock number: 69100-ED\u003c\/li\u003e\n\u003cli\u003ePower Source: Gasoline\u003c\/li\u003e\n\u003cli\u003eEngine: Honda GX390\u003c\/li\u003e\n\u003cli\u003eHorsepower: 13 HP\u003c\/li\u003e\n\u003cli\u003eRPM: 2,446\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 35 x 20 x 39 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 267 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e7.5 HP 230V 3 Phase Electric\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock number: 69200-230-ED\u003c\/li\u003e\n\u003cli\u003ePower Source: Electric\u003c\/li\u003e\n\u003cli\u003eHorsepower: 7.5 HP\u003c\/li\u003e\n\u003cli\u003eVoltage: 230 V\u003c\/li\u003e\n\u003cli\u003ePhase: Three Phase\u003c\/li\u003e\n\u003cli\u003eAmps: 8.7 A\u003c\/li\u003e\n\u003cli\u003eRPM: 2,344\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 41 x 23 x 41 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 287 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e7.5 HP 460V 3 Phase Electric\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock number: 69200-460-ED\u003c\/li\u003e\n\u003cli\u003ePower Source: Electric\u003c\/li\u003e\n\u003cli\u003eHorsepower: 7.5 HP\u003c\/li\u003e\n\u003cli\u003eVoltage: 460 V\u003c\/li\u003e\n\u003cli\u003ePhase: Three Phase\u003c\/li\u003e\n\u003cli\u003eAmps: 17.4 A\u003c\/li\u003e\n\u003cli\u003eRPM: 2,344\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 41 x 23 x 41 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 287 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EDCO","offers":[{"title":"13 HP Honda Gas","offer_id":68106853712024,"sku":"69100-ED","price":14665.99,"currency_code":"CAD","in_stock":true},{"title":"7.5 HP 230V 3 Phase Electric","offer_id":68106853744792,"sku":"69200-230-ED","price":14665.99,"currency_code":"CAD","in_stock":true},{"title":"7.5 HP 460V 3 Phase Electric","offer_id":68106853777560,"sku":"69200-460-ED","price":14665.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0648\/5891\/4968\/files\/69200_CPM-10-2.jpg?v=1795328881"},{"product_id":"edco-cpm-10-10-in-walk-behind-crete-planer-with-pcdiamond-drum-and-feather-control","title":"EDCO CPM-10 10\" Walk-Behind Crete-Planer with PCDiamond Drum and Feather Control","description":"\u003cp\u003eThis EDCO CPM-10 10\" walk-behind Crete-Planer ships with the 10\" PCDiamond flat tooth drum installed, for heavy coating removal and leveling on concrete. It is built on the CPM-10 frame with heavy-duty bearings and a vacuum port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e10\" PCDiamond flat tooth drum installed as standard\u003c\/li\u003e\n\u003cli\u003eFeather control\u003c\/li\u003e\n\u003cli\u003eHeavy-duty, oversized bearings\u003c\/li\u003e\n\u003cli\u003eTethered emergency stop switch\u003c\/li\u003e\n\u003cli\u003e6\" rear wheels for easier handling\u003c\/li\u003e\n\u003cli\u003eVacuum port standard for dust control\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e13 HP Honda Gas\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock number: 69100PCD-ED\u003c\/li\u003e\n\u003cli\u003eEngine: Honda GX390\u003c\/li\u003e\n\u003cli\u003eRPM: 2446\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 38 x 22.5 x 41.5 in.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e7.5 HP 230V or 460V 3 Phase Electric\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock number: 69200PCD-ED\u003c\/li\u003e\n\u003cli\u003eHorsepower: 7.5 HP\u003c\/li\u003e\n\u003cli\u003ePhase: Three Phase\u003c\/li\u003e\n\u003cli\u003eAmps: 16.8 A\u003c\/li\u003e\n\u003cli\u003eRPM: 2344\u003c\/li\u003e\n\u003cli\u003eMax Cord Length: 150 ft, 10 Gauge\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 38 x 22.5 x 41.5 in.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EDCO","offers":[{"title":"13 HP Honda Gas","offer_id":68106853810328,"sku":"69100PCD-ED","price":32305.99,"currency_code":"CAD","in_stock":true},{"title":"7.5 HP 230V or 460V 3 Phase Electric","offer_id":68106853843096,"sku":"69200PCD-ED","price":32305.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0648\/5891\/4968\/files\/69200_CPM-10.png?v=1795328887"},{"product_id":"edco-cpu-10fc-10-in-self-propelled-crete-planer-concrete-scarifier","title":"EDCO CPU-10FC 10\" Self-Propelled Crete-Planer Concrete Scarifier","description":"\u003cp\u003eThe EDCO CPU-10FC is a self-propelled 10\" Crete-Planer that scarifies approximately 500 to 750 sq. ft. per hour at a 1\/8\" depth per pass. Its upcut drum rotation and heavyweight build lift tough floor coatings, and the hydrostatic drive reduces operator fatigue on large jobs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdjustable depth control up to 3\/16\" per pass\u003c\/li\u003e\n\u003cli\u003eHydrostatic transmission with forward and reverse\u003c\/li\u003e\n\u003cli\u003eLifting bail, oil alert and hour meter included\u003c\/li\u003e\n\u003cli\u003eOptional outrigger axle follows slab contours on uneven surfaces\u003c\/li\u003e\n\u003cli\u003eConvertible hood allows multiple drum set-ups and quick drum changes\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e20 HP Honda Gas\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock number: 73400-ED\u003c\/li\u003e\n\u003cli\u003ePower Source: Gasoline\u003c\/li\u003e\n\u003cli\u003eRPM: 2122\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 49 x 25.5 x 42 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 530 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e10 HP 230V 3 Phase Electric\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock number: 73600-230-ED\u003c\/li\u003e\n\u003cli\u003ePower Source: Electric\u003c\/li\u003e\n\u003cli\u003eHorsepower: 10 HP\u003c\/li\u003e\n\u003cli\u003eVoltage: 230 V\u003c\/li\u003e\n\u003cli\u003ePhase: Three Phase\u003c\/li\u003e\n\u003cli\u003eAmps: 11.5\/23 A\u003c\/li\u003e\n\u003cli\u003eRPM: 2,179\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 49 x 24 x 38.5 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 530 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e10 HP 460V 3 Phase Electric\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock number: 73600-460-ED\u003c\/li\u003e\n\u003cli\u003ePower Source: Electric\u003c\/li\u003e\n\u003cli\u003eHorsepower: 10 HP\u003c\/li\u003e\n\u003cli\u003eVoltage: 460 V\u003c\/li\u003e\n\u003cli\u003ePhase: Three Phase\u003c\/li\u003e\n\u003cli\u003eAmps: 11.5\/23 A\u003c\/li\u003e\n\u003cli\u003eRPM: 2,179\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 49 x 24 x 38.5 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 530 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EDCO","offers":[{"title":"20 HP Honda Gas","offer_id":68106853875864,"sku":"73400-ED","price":29831.99,"currency_code":"CAD","in_stock":true},{"title":"10 HP 230V 3 Phase Electric","offer_id":68106853908632,"sku":"73600-230-ED","price":29831.99,"currency_code":"CAD","in_stock":true},{"title":"10 HP 460V 3 Phase Electric","offer_id":68106853941400,"sku":"73600-460-ED","price":29831.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0648\/5891\/4968\/files\/73400_CPU-10-2.jpg?v=1795328893"},{"product_id":"edco-cd-5-5-head-crete-crusher-air-concrete-scabbler-160-cfm","title":"EDCO CD-5 5-Head Crete-Crusher Air Concrete Scabbler – 160 CFM","description":"\u003cp\u003eThe EDCO CD-5 Crete-Crusher is an air-powered 5-head scabbler that hammers pointed carbide bits into concrete for deep removal work such as recapping floors and removing spalled or laitance concrete. It removes up to 250 sq. ft. per hour at a 1\/4\" depth per pass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1,200 hits per minute\u003c\/li\u003e\n\u003cli\u003eRequires 160 CFM at 100 PSI\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 1\/4\" steel frame\u003c\/li\u003e\n\u003cli\u003e2\" vacuum port for dust control\u003c\/li\u003e\n\u003cli\u003eAutomatic in-line lubricator\u003c\/li\u003e\n\u003cli\u003eWhipcheck cable for safe air hose hookup\u003c\/li\u003e\n\u003cli\u003eFive 5-point carbide bits included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock number: 63100-ED\u003c\/li\u003e\n\u003cli\u003ePower Source: Compressed Air\u003c\/li\u003e\n\u003cli\u003eAir Requirement: 160 CFM\u003c\/li\u003e\n\u003cli\u003eAir Pressure: 100 PSI\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 44 x 29 x 40 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 278 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EDCO","offers":[{"title":"Default Title","offer_id":68106853974168,"sku":"63100-ED","price":23839.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0648\/5891\/4968\/files\/63100_CD-5.jpg?v=1795328899"},{"product_id":"edco-tlr-7-traffic-line-remover-7-in-working-width-honda-gas","title":"EDCO TLR-7 Traffic Line Remover – 7\" Working Width, Honda Gas","description":"\u003cp\u003eThe EDCO TLR-7 removes painted traffic lines from asphalt, pushed or pulled by one operator in streets, crosswalks, parking lots and other tight areas. Its 7\" working width grinds approximately 700 to 1,000 lineal ft. per hour with EDCO TLR carbide cutters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSide-to-side movement creates feathered edges that blend with the road surface\u003c\/li\u003e\n\u003cli\u003eSingle operator, push or pull\u003c\/li\u003e\n\u003cli\u003eUses EDCO TLR carbide cutters\u003c\/li\u003e\n\u003cli\u003eHonda gas engine\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock number: 77500-ED\u003c\/li\u003e\n\u003cli\u003ePower Source: Gasoline\u003c\/li\u003e\n\u003cli\u003eEngine: Honda GXV340\u003c\/li\u003e\n\u003cli\u003eRPM: 1,826\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 46.5 x 29 x 36.5 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 438 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EDCO","offers":[{"title":"Default Title","offer_id":68106854006936,"sku":"77500-ED","price":18119.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0648\/5891\/4968\/files\/TLR-7-1.jpg?v=1795328904"}],"url":"https:\/\/facilitysupplypro.com\/fr\/collections\/concrete-scarifiers-and-surface-planers.oembed","provider":"Facility Supply Pro","version":"1.0","type":"link"}